Microsoft Xbox 360 - Troubleshooting
It is important to have a proper Xbox 360 troubleshooting guide manual. The 3 red lights malfunction, also known as the “red ring of death,” is a hardware problem that blocks Xbox 360. In most of the cases, the console might get heated and an important scalar chip of the system may have burnt out. The Xbox 360 has a built-in system that allows technicians and operators to identify what part of the video game console is wrong when it breaks down. It uses the green lights that are normally used to indicate how many controllers are being used during game play. When the Xbox 360 breaks down, a number of these lights go red and the machine stops working. However, the Xbox 360 one red light malfunction is much more specific. It means that the problem is either on the DVD drive, or with the hard drive. In order to reboot the Xbox 360 video game console, the hard drive is disconnected. If the Xbox 360 one red light malfunction persists, it means that the problem resides with the DVD drive. If the console works properly, it means that the Xbox 360 one red malfunction referred to the hard drive.
The Xbox 360 repair guide with instructional videos to help us step-by-step through the repair process. The outer case is taken apart. Remove the DVD drive and unplug the cables. Remove fan and mother board. Turn the motherboard upside down; take off the x-clamp under the heat sink. The GPU and CPU is revealed by removing the heat sink. Clean any dust from the GPU and CPU. Apply arctic silver thermal compound over the GPU and let sit for 15-20 minutes. Add two nylon washers on each screw from the heat sinks and screw them back on the motherboard. With the two screws screwed up through the motherboard add another 2 nylon washers to those same screws. Place the heat sink on those screws, and then screw them up ensuring they are tight. Put all the other pieces back together and start it up.
The Xbox 360 ring of light guide helps us with troubleshooting Xbox effectively. Whenever a red light flashes then there are some problem with your Xbox 360 console and you need to fix Xbox 360 red light so that you can enjoy your favorite game. If your gaming console has a problem and you don’t know how to fix Xbox 360 red light or rectify the problem, you have two options to get your console repaired; either you take the help of a service engineer from market or you send the console to Microsoft for repair. Additionally you will need to spend $100 to $ 150 for taking help of a person in the market or you will have to send $140 to Microsoft for Xbox 360 red light fix, so that your gaming console is repaired. Both these options are not suitable as they are time consuming and you will have to spend at least $100 to get the Xbox 360 red light problem fixed.
Mail this postPopularity: 17% [?]
Thursday 30 Apr 2009 | X-Box Writer | XBox 360 Info
